Europe Warehouse Stock
LiFePO4 Cells QR Codes Decoder (Beta)
- Manufacturer:
- Product Type:
- Battery Type:
- Nominal Capacity:
- Nominal Voltage:
- Production Date:
- Manufacturer Website:
01
Home batteries
5 to 32 kWh at 51.2 V, 48 V class. Wall, rack, cabinet or outdoor — 16 kWh in all four.
Explore
02
LiFePO4 cells
Grade A- to A+, QR intact, factory test report for every single cell.
Explore
03
DIY kits
Solar battery kits: case, cells and BMS matched before it ships. Rack, modular or high voltage.
Explore
04
Commercial storage
Three-phase cabinets and containers, 192 to 512 V, up to 270 kWh per system.
Explore
Software · free to use
Gobel VRM: the whole bank on one screen.
One WiFi module on the master pack reads the whole bank — state of charge, cell voltages, temperatures, cycles and alarms — in a browser or on a phone. No subscription, no per-pack fee.
No subscriptionPACE or JK BMSOne module per bank
Compatible monitoring hardware required. Check your BMS and connection before ordering.
From your battery to your browser
- State of charge
- Cell voltages
- Temperatures
- Alarms and cycles
Diagram, not a live dashboard. Available values depend on the connected system.
Gobel Battery Passport
Tested cell by cell. Proven pack by pack.
Every cell is graded before it goes into a case — capacity, OCV, internal resistance, thickness — and every finished pack then runs a full charge and discharge cycle on the bench. Both sets of numbers are published to that pack's own page. Scan the QR on the case and it opens, no login and no request to sales.
-
01
Grading
Capacity, voltage, internal resistance and thickness logged against every cell code. Off spec never reaches a pack.
-
02
Assembly
Matched cells go into the case, the BMS is fitted and every wire is checked off before the lid closes.
-
03
Full cycle
Charge, discharge, record. A pack that cannot hold its rated capacity on the bench is never boxed.
-
04
Passport
Both test layers published to a public page keyed to the pack's serial number.
Look one up before you buy — every passport page is public, no login. Gobel Battery Passport →
How To Use Battery QR Decoder
1. Where to Find QR Code
All brand new LiFePO4 cells have metal QR Code (Data Matrix) on the cell body somewhere around poles. For example:
2. How to Type QR Code
There are code on the metal QR plate. Valid code has to be 24 bits (or 19 bits for recycled cells), which is usually splited into two parts. These two parts have to be combined in right order. Some cells may have other letters which are not a part of code, these letters should be ignored. For example:
3. How to Check If Your Code is Right
For Example:
4. What Cells Are Supported
The decoder algorithm is based on "Battery Coding Standards" issued by China Goverment. Any codes following this standard can be decoded by Gobel Power Battery QR Decoder, such as LiFePO4, Ternary, LTO cells, modules and packs.
By now, all codes' production date, product type, battery type and voltage (cells only) information can be decoded. Manufacturer, capacity information of EVE cells and some CATL cells can be decoded.
5. Use Phone Camera to Scan QR and Decode
WARNING
Now there is reprinted QR code in the market, it follows same coding rules as original codes as shown in the picture.
厂家合作： 添加电芯解码数据请联系微信： 13684942767 （仅限电芯生产厂家）
Update Date： 11 Nov, 2025
