Europe Warehouse Stock
-
Gobel Power 51.2V 15kW Stackable LiFePO4 Battery
Ship from China US$2,624.00
-
Gobel Power GP-SR1-JK314 Standard 51.2V 314Ah 16kWh LiFePO4 Server Rack Battery
Ship from China US$2,204.00
-
EVE MB31 3.2V 314Ah EV Grade A+ LiFePO4 Battery Cell with Dual Thread Terminals - EU Warehouse
Ship from Europe US$82.00
-
EV Grade A+ EVE 3.2V 314Ah MB31 Rechargeable LiFePO4 Battery Cell
7% OFF Ship from China US$74.00
5.1kWh of German-engineered
LiFePO4 battery storage.
Small enough to carry. Smart enough to run itself.
The Thor 5000 packs REPT 100Ah HSEV-grade LiFePO4 cells, a 100A JK-Inverter BMS with Bluetooth app control, and an industrial 20kA circuit breaker into a 41kg stackable battery. CAN pre-configured for Victron. RS485 pre-configured for Growatt. No dongles. No gateways. Just pure energy storage, designed in Germany.
A 5.1kWh LiFePO4 battery
you can actually carry.
Then stack another on top.
At 135mm thin and 41kg, the Thor 5000 defies every assumption about home battery storage being heavy and hard to install. Slide it onto a shelf, rack-mount it, or stack them vertically — the steel enclosure protects at IP20, and silent natural convection cooling means zero fan noise. Optional 201 stainless steel upgrade for coastal and humid environments.
- 135 × 442 × 450mm — one of the most compact 51.2V 100Ah LiFePO4 batteries in its class
- 41kg — one-person portable, no forklift or heavy lifting equipment needed
- Stackable or 19-inch server rack mountable — fits shelves, closets, and equipment racks
- Rugged steel enclosure, IP20 rated — optional 201 stainless steel for outdoor or marine environments
- Silent passive cooling — natural convection, no fans, zero maintenance
A 48V LiFePO4 battery
with JK-Inverter BMS.
Every cell, on your phone.
Tap the BMS button to wake Bluetooth, open the JK-BMS app, and you’re looking at every one of the 16 REPT cells in real time. The 100A JK-Inverter BMS (JK_PB1A16S10P V19) runs 1A active balancing across every cell while protecting against overcharge, over-discharge, short circuits, and temperature extremes — all configurable from your phone. Use JK-BMS Monitor on PC for firmware updates and advanced tuning. No subscription. No cloud dependency.
- 100A JK-Inverter BMS (JK_PB1A16S10P V19) with 1A active cell balancing across all 16 LiFePO4 cells
- Bluetooth wireless app — toggle on via button, connect JK-BMS app in seconds
- Real-time per-cell voltage, temperature, current, and state-of-charge monitoring
- Customizable protection thresholds via JK-BMS app or JK-BMS Monitor PC software
- Victron VRM Portal integration for remote whole-system energy monitoring
CAN for Victron.
RS485 for Growatt.
Plug in. Done.
The Thor 5000 ships with CAN bus pre-configured for Victron Energy and RS485 pre-configured for Growatt inverters. Grab a Victron Type A CAN cable or a standard Cat5e RJ45 patch cable, connect, and the 51.2V LiFePO4 battery is live — no protocol converters, no manual DIP-switch translation tables. And if your inverter doesn’t communicate at all? The JK-BMS runs independently, managing the battery without external input.
- CAN-Bus default protocol: Victron Energy — plug in a Victron Type A CAN cable and go
- RS485 default protocol: Growatt — daisy-chain with standard Cat5e RJ45 patch cables
- Operates independently without inverter communication — the JK-BMS handles itself
- DIP address switches on front panel — simple master/slave configuration for multi-battery setups
- JK-BMS firmware upgradable via PC for new inverter protocols and feature updates
20,000 amps of
breaking capacity.
In a home battery.
The front-panel 100A DC-rated circuit breaker can interrupt 20kA at 250VDC — that’s industrial switchgear performance, not consumer-grade fuse protection. Paired with HSEV-grade REPT 100Ah LiFePO4 prismatic cells in a steel enclosure, you get a battery that is inherently thermal-stable (no cobalt, no thermal runaway) and mechanically built for the worst-case scenario. The Thor 5000 doesn’t just pass safety tests — it’s engineered to a standard that makes them an afterthought.
- 100A DC circuit breaker with 20kA breaking capacity at 250VDC — industrial switchgear grade
- Steel enclosure (optional 201 stainless steel) — rugged, fire-resistant battery housing
- HSEV-grade REPT 100Ah prismatic LiFePO4 cells — tested, matched, and assembled under strict QC
- Cobalt-free LiFePO4 chemistry — inherently thermal-stable, no thermal runaway, no fire propagation risk
- 6,000 cycles at 80% DoD, 3,000 cycles at 100% DoD — tested cycle life, not a marketing number
One 5.1kWh stackable battery today. 163kWh of home energy storage tomorrow.
A single Thor 5000 handles an off-grid cabin or backup circuit. Daisy-chain up to 32 units via RS485 for 163kWh of total LiFePO4 battery capacity — enough for the largest homes, farms, and small commercial solar storage installations. DIP switch addressing keeps configuration simple: set the master to 0, increment slaves. The stackable form factor means you build vertically, not across the floor. And every battery operates independently or as part of the RS485 chain — your choice.
- Up to 16 units in parallel via RS485 I/II ports on default firmware — 81.6kWh of LiFePO4 storage
- Up to 32 units with firmware V19.31B or higher — 163kWh total for whole-home and commercial use
- Simple DIP switch addressing on the front panel — master at 0, slaves increment sequentially
- Stackable vertical design saves floor space — build up, not out
- Operates with or without inverter communication — flexible for any solar or off-grid deployment
One 51.2V 100Ah LiFePO4 battery.
Every off-grid and solar storage application.
From a weekend off-grid cabin to a full-time family home solar backup system — the Thor 5000 stackable LiFePO4 battery scales to whatever energy storage mission you give it.
German-designed 51.2V 100Ah
LiFePO4 battery. Ready for
your off-grid project.
The Thor 5000 combines German engineering discipline with Gobel Power’s precision manufacturing. HSEV-grade REPT 100Ah cells. A 100A JK-Inverter BMS with Bluetooth that puts every cell on your phone. An industrial 20kA circuit breaker that doesn’t compromise. CAN pre-configured for Victron, RS485 pre-configured for Growatt. All in a 41kg stackable LiFePO4 battery that one person can carry into place. Whether you’re building an off-grid solar system, backing up a home, or powering a workshop — the Thor 5000 is ready to stack and run.
- Model:
- GP-Thor-5000
- Battery Type:
- LithiumIronPhosphate/LFP/LiFePO4
- Nominal Voltage:
- 51.2V
- Nominal Capacity:
- 100Ah
- Total Energy:
- 5.1kWh
- Battery Cells:
- 16S1P 100Ah Cells
- Max Charge Current:
- 80A
- Max Discharge Current:
- 100A
- Charge Cut-off Protect Voltage:
- 56V
- Disharge Cut-off Protect Voltage:
- 48V
- Communication Port:
- RS485, CAN, Bluetooth
- Parallel Connection:
- Max 16 Batteries in parallel(32 with FW V19.31B)
- Series Connection:
- No
- Nr. of Cycles 80% DoD (0.2C, 20°C）:
- 6000 until 80% SoH
- Size:
- 135*430*450mm
- Weight:
- 41kg
- Cooling:
- Natural cooling
- Environment:
- Indoor
- Mounting options:
- Stackable /Server Rack
- Discharge Temperature (℃):
- 0℃~+40℃
- Charge Temperature (℃):
- 0℃~+40℃
- Warranty:
- 10 Years
- Maximum Elevation:
- 4000m
Visual Gallery & Diagrams
Actual Product Photos
Product Dimensions
Product Appearance
Ultimate 5.1kWh Off-Grid Power: Gobel Power Thor 5000
The Gobel Power Thor 5000 is a premium 5.1kWh (51.2V) LiFePO4 battery designed for off-grid, on-grid, and backup systems. It delivers 6,000 cycles at 80% DoD and 3,000 cycles at 100% DoD to 80% SoH. Featuring a smart 100A JK-Inverter BMS (JK_PB1A16S10P V19), it provides 1A active cell balancing to dynamically maximize health and capacity. For seamless integration, CAN communication is set for Victron Energy by default and RS485 is set for Growatt by default. Parallel communication supports up to 32 units via RS485 I/II ports. Built with a 100A DC-rated circuit breaker with 20kA breaking capacity at 250VDC, it adds industrial-grade safety for your solar setup.
Gobel Power was established in 2012 and is based in Shenzhen, China. Our products and services include wholesaling cylindrical & prismatic LiFePO4 and Lithium Ion battery cells, producing lithium battery packs and providing battery solutions. Our products are mainly used in solar energy storage, electric bikes, electric scooters, electric motorbike, boats, forklifts, sweepers, golf carts, and recreational vehicles.
-
Solution Energy Storage Battery -
Solution Battery BMS
